Why pay for chlorine when you can make your own?

KLEENWATER's Salt Water Chlorinator system is based on the principle of electrolysis - the salt in the pool water is converted to chlorine which sanitises the water before reverting back to salt in solution.
Compare the ever increasing cost of sanitising your pool with granular chlorine, to that of KLEENWATER's salt water chlorination system.
With a KLEENWATER's unit you enjoy incredible savings of up to 90% of your annual maintenance costs.

KLEENWATER uses low levels of sodium chloride, only .3% (3000PPM salt) which is electrolysed in a special cell to produce useable chlorine in the form of sodium hypochlorite. Salt levels are around one-seventh of seawater!

After the addition of salt to your pool, no salt is lost through the KLEENWATERS process, or by evaporation. Small amounts may be required occasionally to compensate for back-washing, splashing and dilution from rain.


The Process

KLEENWATER uses low levels of common salt at a minimum of 0.3% or 3 000ppm (a third as salty as your own tear drop). This is electrolysed using an advanced electronic process to sanitise the pool water. The pool is sanitised automatically even when you are away for extended periods.

Models available to suit most pool applications from small patio pools to large pools. Simple to install on any existing or new pool. Suitable for all pool surfaces, including concrete, tile, fibreglass and vinyl.